LEED v3 COMPLYING PRODUCTS
Building Reuse - MR 1.1 & 1.2
Materials Reuse - MR 3
Building Reuse - MR 1.1 & 1.2
Maintain 55%/75%/95% Of Existing Walls, Floors &
Roof / Maintain 50% Of Interior Non-Structural
Elements
Materials Reuse - MR 3
5% & 10% Building Material & Product Reuse
The following products can assist in the
restoration and improvement of existing concrete
floor slabs (MR 1.1 for structural floors
or MR 1.2 if non-structural), reducing the need for
more virgin building materials (MR 3).
Dauercast SQ Epoxy/Resin Broadcast
Quart Flooring Systems
Dauercast DQ Epoxy/Resin Broadcast
Quart Flooring Systems
Dauergrout E Epoxy/Polyurethane
Copolymer Flooring System
Duro-Nox Silicate Based Hardener/Sealer Duro-Nox LS Lithium Silicate Based
Hardener/Sealer
Duro-Polish Low VOC Version Synthetic
Polymer Floor Polish
Duro-Polish Plus Low VOC Version
Synthetic Polymer Floor
Polish & Stain Blocker
Regional Materials - MR 5
10% & 20% Extracted, Harvested Or Recovered, Manufactured Regionally
Nox-Crete products are manufactured in our
Omaha, Nebraska area production facilities.
Choosing Nox-Crete products for use on projects
within a 500-mile radius will help to reduce the
impact on transportation emissions which can
occur when products are not selected regionally
and must travel extended distances to reach the
project site.
Rapidly Renewable Materials MR 6
These products contain rapidly renewable materials derived from plants with a 10-year or shorter harvest cycle as required by LEED Rapidly Renewable Materials MR 6 and may contribute to the acquisition of LEED credit in this category.
Bio-Clean Concentrate Concentrated, Biodegradable, Citrus Based Concrete Cleaner And Degreaser
Bio-Clean Ready Ready To Use, Biodegradable, Citrus Based Concrete Cleaner And Degreaser
Bio-Strip Concentrated, Biodegradable, Concrete Floor Coating Stripping Gel
Blast-Off Powerful, Water Based, Biodegradable, Non-Corrosive Concrete Buildup And Splatter Remover
Bio-Nox 100% Biodegradable Form Release Agent
Nox-Crete Form Coating EB 100% Biodegradable Form Release Agent
Nox-Crete PCE 100% Biodegradable Form Release Agent
Silcoseal Select Chemically Active, Water Based Cure And Bondbreaker
Silcoseal 2000F Chemically Active, Water Based Cure And Bondbreaker
Low-Emitting Materials - Adhesives
and Sealants - IEQ 4.1
Dynaflex 502 Epoxy/Polyurethane Copolymer Joint Filler For Extreme Duty Applications
Dynaflex JF-85 Polyurea Joint Filler For Extreme Duty Applications
Low-Emitting Materials - Paints &
Coatings - IEQ 4.2
Dauercast SQ Epoxy/Resin Broadcast
Quartz Flooring Systems
Dauercast DQ Epoxy/Resin Broadcast
Quartz Flooring Systems
Dauergrout E Epoxy/Polyurethane
Copolymer Flooring System
Cure & Seal 100 E Curing & Sealing
Compound
Cure & Seal 1200 E Curing & Sealing
Compound
Duro-Nox Silicate Based Hardener/Sealer
Duro-Nox LS Lithium Silicate Based
Hardener/Sealer
Duro-Nox LSC Lithium Silicate Based
Hardener/Sealer
Duro-Polish Low VOC Version Synthetic
Polymer Floor Polish
Duro-Polish Plus Low VOC Version
Synthetic Polymer Floor
Polish & Stain Blocker
Low-Emitting Materials - Flooring
Systems - IEQ 4.3
Dauercast SQ Epoxy/Resin Broadcast
Quartz Flooring Systems
Dauercast DQ Epoxy/Resin Broadcast
Quartz Flooring Systems
Dauergrout E Epoxy/Polyurethane
Copolymer Flooring System
Cure & Seal 100 E Curing & Sealing
Compound
Cure & Seal 1200 E Curing & Sealing
Compound
Duro-Nox Silicate Based Hardener/Sealer
Duro-Nox LS Lithium Silicate Based
Hardener/Sealer
Duro-Polish Low VOC Version Synthetic
Polymer Floor Polish
Duro-Polish Plus Low VOC Version
Synthetic Polymer Floor
Polish & Stain Blocker
LEED Product Compliance Letters
GREEN ENGINEERED PRODUCTS
Bonding & Patching Agents
Concrete Cleaners
Cures & Sealers
Decorative Stains/Sealers
Evaporation Reducer
Floor Coating Systems
Equipment & Form Maintenance &
Cleaning
Form Release Agents
Form Treatments
Hardeners & Polishes
Joint Fillers & Joint Filler Stain Blocker
Tilt-Up Cure & Bondbreakers
Surface Set Retarder
Water Repellants/Sealers
|
|
|
|
LEED® Complying Products
Managed by the non-profit U.S. Green Building Council (USGBC), LEED (Leadership
in Energy and Environmental Design) provides third-party review and certification of a
building’s green status using a set of defined criteria established by the USGBC.
Nox-Crete has determined that the products listed can contribute to the acquisition of
points in the indicated LEED categories.
Things To Remember When Selecting Products For Use On Projects Seeking
LEED Certification:
- LEED and the USGBC do not certify, endorse or otherwise approve contractors, products
or construction processes. Only a project can earn LEED certification.
- Products are not reviewed or certified under the LEED Rating System. LEED credit
requirements cover the performance of materials in aggregate, not the performance of
individual products or brands.
|
For More Information On LEED, Visit www.usgbc.org/leed
Nox-Crete is a member of the USGBC and supports green building initiatives. |
Green Engineered™ Products
Nox-Crete has been involved in developing products that are
safer for both people and the environment since the early
1980s. From this has come our Green Engineered™ line of
products.
The cornerstone of our Green Engineered™ concept is our research and development
of water based products. By using water based products, the impact on non-renewable
resources such as petroleum and its distillates is reduced.
Workers who apply water based products are exposed to fewer harmful substances. The
low VOC nature of water based products lessens both the impact on air quality and on
workers’ health. Water based products also are low odor, creating both a more pleasant
environment for workers during the construction process and for after-occupancy
tenants.
Our Green Engineered™ Products Line Is Manufactured Using Safer Raw
Materials And Includes Products That Offer One Or More Of The Following
Advantages:
• Low Voc
• Low Odor |
• Water Based
• Biodegradable |
Read individual Product Data Sheets for specific attributes.
With Green Engineered™ products, design and construction professionals can meet
the expectations for project design and construction without compromise to product
performance or the world we share.
|
printer friendly
printer friendly